Quick Reference Guide

--embnics
Option
--embnics
Valid Arguments enable, disable
Description
Turns both the embedded NICs on or off. This option is only present on systems
that do not support the embnic1 and embnic2 options. This option can be
replicated.
Example:
A:>syscfg --embnics=enable
--embnics=enable
Applicable Systems All PowerEdge systems prior to PowerEdge yx2x systems
--embnic1pxe
Option
--embnic1pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the first
embedded NIC. If PXE is disabled, the first NIC is not found in the boot order. If
PXE is enabled, the first NIC is placed at the end of the boot order. This option
is only present on systems that do not support the embnic1 option. This option
can be replicated.
Example:
A:>syscfg --embnic1pxe=enable
embnic1pxe=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embnic2pxe
Option
--embnic2pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the second
embedded NIC. If PXE is disabled, the second NIC is not found in the boot
order. If PXE is enabled, the second NIC is placed at the end of the boot order.
This option is only present on systems that do not support the embnic2 option.
This option can be replicated.
Example:
A:>syscfg --embnic2pxe=enable
embnic2pxe=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embsataraid
Option
--embsataraid
Valid Arguments off, combined, ata, ahci, raid, qdma
35