Quick Reference Guide

Example:
A:>syscfg --embnic3=onnopxe
embnic3=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embnic4
Option
--embnic4
Valid Arguments on, off, onnopxe, onwithiscsi
Description
Turns the fourth embedded NIC on with PXE enabled, off, or on without PXE
enabled. This option is only valid for supported systems that have four
embedded NICs. If the fourth NIC is enabled without PXE, it is not found in the
boot order. If the fourth NIC is turned on with PXE, it is placed at the end of the
boot order. The onnopxe argument is not supported on all systems. This option
can be replicated.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI
server. The embnic4 option can be replicated.
Example:
A:>syscfg --embnic4=onnopxe
embnic4=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embnic1nic2
Option
--embnic1nic2
Valid Arguments enable, disable
Description
Enables or disables the operating system interface of the first and second
embedded NIC controllers.
Example:
A:>syscfg --embnic1nic2=enable
--embnic1nic2=enable
Applicable Systems PowerEdge 1855, PowerEdge 6850, and PowerEdge 11G systems
--embnic3nic4
Option
--embnic3nic4
Valid Arguments enable, disable
Description
Enables or disables the operating system interface of the third and fourth
embedded NIC controllers.
Example:
A:>syscfg --embnic3nic4=enable
--embnic3nic4=enable
Applicable Systems PowerEdge yx1x systems
34