Quick Reference Guide

--bootseqretry

Option

--bootseqretry

Valid Arguments enable, disable

Description Enables or disables the boot sequence retry feature. When set to enable, the

system re-attempts to set the boot order after a 30-second time-out if the last

boot attempt has failed. This option can be replicated.

A:>syscfg --bootseqretry=enable

bootseqretry=enable

Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.

--cmosdefaults

Option

--cmosdefaults

Valid Arguments enable, disable

Description

Enables or disables the request for a default CMOS value during the next

reboot.

A:>syscfg --cmosdefaults=enable

cmosdefaults=enable

Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.

--conboot

Option

--conboot

Valid Arguments enable, disable

Description

Enables or disables configuring or reporting of console redirection after reboot.

This option is available on all supported systems that support console

redirection. This option can be replicated.

Example:

A:>syscfg --conboot=enable

conboot=enable

Applicable Systems All PowerEdge systems prior to PowerEdge 12Gsystems.

--conred

Option

--conred

Valid Arguments serial1, serial2, off, bmcsol, mmb

Description

Configures or reports the communication port for console redirection. If this

option is set to serial port, then the serial port option is not available. If only one

serial port is present on a system, the serial2 argument is not available. This

option can be replicated.