Quick Reference Guide

Error Code Message
155 Profile should be custom for setting cpupowermode,
memorypowermode and fanmode.
156 There was an error setting the Power Option.
157 The power cap value entered is out of range. Please try again.
158 The power cap value entered must be between 0 to 100 if unit
is percent.
159 Invalid IPv6 address. The IPv6 address cannot be link-local or
multicast.
160 Invalid IPv6 address. The IPv6 address specified has incorrect
address format.
161 Invalid IPv6 address. The gateway address specified has
incorrect address format.
162 Invalid IPv6 address. The Primary DNS server address specified
has incorrect address format.
163 Invalid IPv6 address. The Secondary DNS server address
specified has incorrect address format.
164 Invalid IPv6 address. The gateway address specified is
invalid.
165 Invalid configuration. Attempting to apply IPv6 configuration
on a non supported platform.
166 Invalid IPv6 configuration. Attempt to set DNS server address
manually while DNS address source is set to auto.
167 Invalid IPv6 configuration. Attempt to set IPv6 address
manually while IPv6 address source is set to auto.
168 Invalid IPv6 configuration. Attempting to apply IPv6
configuration without loading IPv6 stack.
169 Invalid IPv4 configuration. Attempting to apply IPv4
configuration with IPv4 disabled.
170 Invalid IPv6 configuration. Ipv6 address cannot be specified
without specifying prefix-length.
171 Invalid IPv6 configuration. dnssrcv6 cannot be set to auto
when ipsrcv6 is set to manual.
172 Error while executing IPMI Set command.
173 Error while executing IPMI Get command.
174 Error during Trap Alert.
175 Unspecified error.
176 Getting LCD settings failed.
177 Invalid configuration. Attempting to set cap when capenable is
set to disable.
149