Quick Reference Guide

Error Code Message
128 The second channel can only be set if the RAID controller is
set to RAID.
129 The set operation, '%s', requires sub commands.
130 The service tag for this system is not available.
131 The system ID value is not available.
132 The system information string is not available.
133 A system error has occurred.
134 Usage error.
135 The uuid information is not present on this system
136 Version cannot be accompanied with any other option.
137 The self-identify blinker timer should be set to 0..255
second(s).
138 Encrypt key is too long.
139 Encrypt key is invalid, accepted characters are 0 to 9 or A to
F.
140 Parameter has been temporarily disabled due to a dependency on
other settings.
141 The old password supplied is incorrect. The new password will
not be set. Please try again.
142 Cannot stat /etc/omreg.cfg file. Please ensure /etc/omreg.cfg
file is present and is valid for your environment. You can
copy this file from the DTK iso.
143 Getting nicselection settings failed.
144 HAPI Driver Load Error.
145 Filter action power reduction is only supported for the system
power warn/fail filters.
146 TPM/TCM Clear settings requires setup password.
147 There is currently no TPM/TCM Clear request pending.
148 Password is not required for retrieving the ’%s’ options.
149 Setup password is required for setting the ’%s’ options.
150 Invalid Password override.
151 Invalid TPM/TCM set option.
152 There was an error setting the TPM/TCM option.
153 There is no setup password installed on this system.
154 The setup password supplied is incorrect. Please try again.
148