Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
stripesize=64
cachepolicy=d
adisk=0:3:1,0:4:1
NOTE: If the controller uses global hot
spares, the raid.ini file contains the
following section:
[GlobalHotspare0]
controllerid=0
failoverdrive=0:8:0
Assigning, Unassigning, And Listing Global Hot Spares
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for assigning and unassigning
global hot spares.
Table 68. Assigning, Unassigning, and Listing Global Hot Spares
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -ac=sghs
-c=id -ad|-pd=
ch:targ:encl
or
controller
action=setglob
alhotspare
controllerid=i
d adisk|
pdisk=channel:
target:enclosu
re
NA NA
Assigns the specified disk as a global hot
spare on the controller. You can assign only
one disk at a time.
Example:
A:>raidcfg -ctrl -ac=sghs -c=2
-ad=0:1
RAIDCFG Command successful!
-ad|-pd -
ac=lghs -c=id
or adisk|pdisk
-
action=listglo
balhotspare
controllerid=i
d
NA NA
Displays the array (physical) disks used for
global hotspare for the specified controller.
Example:
A:>raidcfg -ad -ac=lghs -c=2
RAIDCFG Command successful!
-ctrl —ac=rghs
-c=id -ad|-pd=
ch:targ:encl or
controller
action=removeg
lobalhotspare
controllerid=i
d adisk|
pdisk=channel:
target:enclosu
re
NA NA
Unassigns all the specified global hot spares
to a disk on the specified controller.
Example:
A:>raidcfg -ctrl -ac=rghs -c=2-
ad=0:1,0:2
RAIDCFG Command successful!
133