Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
: lun,...
channel:target
: lun,... [or
channel:target
:
enclosure,...]
– RAID 1: 100 MB
– RAID 5: 100 MB
• For PERC 6 controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
– RAID 6: 100 MB
– RAID 60: 100 MB
• For PERC 7 and PERC 8 controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
– RAID 6: 100 MB
– RAID 10: 100 MB
– RAID 50: 100 MB
– RAID 60: 100 MB
• Software RAID controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
– RAID 10: 100 MB
NOTE: If this option is not provided,
RAIDCFG determines the maximum
possible virtual disk size and creates it.
-wp or
writepolicy
wb, wt, wc, nwc
Sets the write policy for the virtual disk. The
valid arguments are:
• wb — Write-Back caching sets the
controller to send a write-request
completion signal as soon as the data
is in the controller cache but has not
yet been written to disk.
• wt — Write-Through caching sets the
controller to send a write-request
completion signal only after the data
is written to the disk.
NOTE: The wb and wt options are
supported on the following RAID
controllers only:
• PERC 5/E Adapter, PERC 5/I
Integrated, PERC 5/i Adapter
• PERC 6/i Integrated, PERC 6/i
Adapter, PERC 6/E Adapter
• PERC 7 and PERC 8
122