Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
Controller_Name: PERC 6/E
Channels: 2
No.of Virtual_Disks: 0
Firmware Version: 3500
RAIDCFG Command successful!
-c or
controllerid
<valid
controller ID
number>
Displays the properties for the RAID controller
with the specified controller ID. This option
combination is mandatory.
Example:
A:>raidcfg -ctrl -c=2
Controller_ID/Slot_ID: 2
Controller_PCI_ID: 8:14:0
Controller_Name: PERC 6/E
Channels: 2
Virtual_Disks: 1
Firmware Version: 521S
RAIDCFG Command successful!
Creating Virtual Disks
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for creating virtual disks.
NOTE: If you create a virtual disk on Windows PE, you must reboot your system.
117