Owner's Manual

• Running partcfg.bat may fail when virtual media is enabled. For the hard disk, partcfg.bat uses the driver letter
"c:". When virtual media is enabled, sometimes, the virtual device gets assigned with the drive letter "c:" And,
partcfg.bat execution fails. To run partcfg.bat successfully, either disable the virtual media or use the diskpart
command to assign a free driver letter for partcfg.bat.
Windows PE Issues
• Running partcfg.bat may fail when virtual media is enabled. For the hard disk, partcfg.bat uses the driver letter
"c:". When virtual media is enabled, sometimes, the virtual device gets assigned with the drive letter "c:" And,
partcfg.bat execution fails. To run partcfg.bat successfully, either disable the virtual media or use the diskpart
command to assign a free driver letter for partcfg.bat.
• Windows PE 3.0 and Windows PE 4.0 for 64-bit do not support racadm.exe for DRAC 4.
Corrected Problems
The following problems were reported in earlier releases of Server Administrator and have been corrected
in this release:
Issue 1 (BITS043596): Supported OS information led to confusion.
Description: Supported OS information sections are modified in Readme, User Guide, and CLI guide
Issue 2 (BITS039196): DTK Syscfg allows user to configure Control panel access for Blade server.
Description: Syscfg modified to restrict Control panel operations on Blade servers
Issue 3 (BITS039445): DTK 4.0 Build 403 - Startup Script Execution Issues.
Description: DTK ELI modified to fix the startup script execution issues.
Global Support
For information on technical support, visit dell.com/contactus .
For information on documentation support, visit dell.com/support/manuals > Product Type > Software, Monitors,
Electronics & Peripherals > Software > Enterprise System Management.
Click on the specific product on the
right‐side to access the documents.