Quick Reference Guide

SYSCFG 87
• The BIOS version or hardware feature set.
• A missing or expired license. The system displays an error message if the
required license is not found. For more information, see
Dell License
Manager
on support.dell.com/manuals .
NOTE: PowerEdge yx2x systems are backward compatible and support legacy
arguments enable and disable. However, it is recommended to use enabled and
disabled on PowerEdge yx2x systems as the arguments enable and disable may be
deprecated in future. For more information, see the BIOS options help.
To list the options which are are set on the system, but not applied due to
pending reboot, type:
syscfg --pendingvalues
The following table lists the SYSCFG options and arguments supported on
PowerEdge yx2x systems.
Table 3-6. SYSCFG Options and Arguments for BIOS Configuration on PowerEdge yx2x
Systems
Group Option Valid Arguments Description
BIOS Boot
Settings
--BootSeq numerical list,
separated by
commas or list of
device names,
separated by
commas
Specifies the location of
the operating system files
needed for system startup.
This option is applicable
when bootmode is set to
Bios and has no effect
when bootmode is set to
Uefi.
--HddSeq numerical list,
separated by
commas or list of
device names,
separated by
commas
Specifies the order in
which hard-disk drives are
configured in the system.
The first hard drive in the
system will be the bootable
C: drive in DOS/DOS-like
operating systems. This
option is applicable when
bootmode is set to Bios
and has no effect when
bootmode is set to Uefi.