Quick Reference Guide

82 SYSCFG
Table 3-4 lists the sub-options and arguments for the tcm option.
--val
setuppwd
<string> Validates the setup password for TPM
authentication. If you try to change
DTK settings, you are prompted to
enter this password to access the
settings. For more information on
delimiters, see "Command Line
Option Delimiters" on page 15.
Example:
A:>syscfg tpm
--tpmactivation=enabled
--tpmclear --valsetuppwd=
<setup_password>
--setup
pwdoverride
NA On systems that do not have a setup
password configured, if you set this
option, you are not prompted for a
password to access DTK settings.
A:>syscfg tpm
--tpmactivation=enabled
--tpmclear
--setuppwdoverride
Table 3-4. Sub-options and Arguments for the tcm Option
Opti
on
Sub-option Arguments Description
tcm --tcmsecurity off Does not report the presence of TCM to the
operating system.
on Reports the presence of TCM to the
operating system.
Example:
A:>syscfg tcm --tcmsecurity=off
--tcmactivation enabled Enables and activates the TCM feature.
disabled Disables and deactivates the TCM feature.
Table 3-3. Sub-options and Arguments for the tpm Option
(continued)
Option Sub-option Arguments Description