Quick Reference Guide

SYSCFG 81
NOTE: After setting tpmactivation to
enabled or disabled, if you reboot your
system, DTK displays the TPM
Configuration Honoured
system will reset and the
system reboots again message
and reboots.
NOTE: When you set tpmactivation to
enabled or disabled, DTK displays the
value of tpmactivation as nochange.
However, the TPM feature is
activated/deactivated when you reboot
the system.
--tpmclear NA Clears the contents of the TPM chip
without erasing the tpmsecurity and
tpmactivation settings.
Example:
A:>syscfg tpm
--tpmactivation=enabled
--tpmclear
--setuppwdoverride
--undo
tpmclear
NA Cancels the result of the tpmclear
setting. If you specify this setting
before specifying the tpmclear setting,
the There is currently no
pending TPM Clear request
message is displayed.
Example:
A:>syscfg tpm
--tpmactivation=enabled
--undotpmclear
--setuppwdoverride
Table 3-3. Sub-options and Arguments for the tpm Option
(continued)
Option Sub-option Arguments Description