Quick Reference Guide

SYSCFG 71
Example:
A:>syscfg --serialcomm=on
serialcomm=on
The --serialcomm option can be used
with the external serial (--extserial)
option instead of the --conred
(available on systems earlier than
PowerEdge x9xx systems) option.
--serialport
addrsel
default,
alternate
Sets the port address of the serial
devices.
When this option is default, Serial
Device1 is set to COM
port 1 and Serial Device 2 is set to
COM port 2.
When this option is alternate, Serial
Device 1 is set to COM
port 2 and Serial Device 2 is set to
COM port 1.
This option can be replicated.
Example:
A:>syscfg
--serialportaddrsel=
default
serialportaddrsel=default
PowerEdge
yx1x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems