Quick Reference Guide

SYSCFG 57
--lptmode ps2, at Configures or reports the mode of an
LPT (parallel) port. This option is
available on all supported systems with
an LPT port. This option is recorded
to an output file for replication.
Example:
A:>syscfg --lptmode=ps2
lptmode=ps2
PowerEdge
1855,
PowerEdge
6850, and
PowerEdge
yx1x
systems
--mem
dynamic
power
enable, disable Enables or disables the dynamic
memory power states. This option
can be replicated.
Example:
A:>syscfg --
memdynamicpower=enable
memdynamicpower=enable
PowerEdge
R910
system with
Intel Xeon
7500 series
--mem
intleave
enable, disable Enables or disables the memory
interleave mode. This option can be
replicated.
Example:
A:>syscfg --memintleave=
enable
memintleave=enable
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--mem
operating
mode
optimizer,
mirror,
advancedecc
Selects the memory operating mode.
This feature is active only if a valid
memory configuration is detected.
Example:
A:>syscfg --
memoperatingmode=optimizer
memoperatingmode=optimizer
PowerEdge
yx1x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems