Quick Reference Guide

SYSCFG 51
--hddfailover off, on Specifies the device in the Hard Disk
Drive Sequence menu that has not
been attempted in the boot
sequence.When set to on, all devices
are attempted in an order in which
they are configured. When set to off,
only the first device in the hard disk
sequence is attempted. This option
can be replicated.
Example:
A:>syscfg --hddfailover=on
hddfailover=on
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--hpcmode enable, disable Enables or disables the High
Performance Computing (HPC)
Mode. When set to enable, the HPC
is enabled utilizing only the high
frequency P-State settings. When set
to disable (default value), all P-States
inherent to the CPU are used.
To fully enable HPC Mode, set the
power management to custom, cpu
power and performance management
to OsDbpm, and fan power and
performance management to
maximum performance.
Example:
A:>syscfg --hpcmode=enable
hpcmode=enable
PowerEdge
R715,
R815, and
M915 with
AMD
Opteron
6200 series
processor
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems