Quick Reference Guide

46 SYSCFG
--embscsi2 on, off Turns the second embedded SCSI
controller. This option is only valid for
supported systems that have an
embedded SCSI controller. This
option can be replicated.
Example:
A:>syscfg --embscsi2=on
embscsi2=on
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--emb
scsiraid
raid, off, scsi Sets the specified value for the SCSI
RAID controller. This option is only
valid for supported systems that have
SCSI ROMB. Some systems do not
support the scsi argument. This option
can be replicated.
CAUTION: If you change the
controller from SCSI to RAID mode,
data loss may occur. Backup any data
you must save before changing modes.
Example:
A:>syscfg --embscsiraid=
raid
embscsiraid=raid
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--emb
scsiraidchb
raid, scsi Sets the second channel on an
embedded RAID controller to SCSI
or RAID. This option is only valid for
systems that support RAID/RAID and
RAID/SCSI settings for channels A
and B. This option can be replicated.
Example:
A:>syscfg --
embscsiraidchb=raid
embscsiraidchb=raid
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems