Quick Reference Guide

SYSCFG 45
--emb
sataraid
off, combined,
ata, ahci, raid,
qdma
Configures an embedded SATA RAID
controller. This option can
be replicated.
• off — disables the embedded SATA
RAID controller.
•
combined — sets the SATA RAID
controller to combined mode.
•
ata — sets SATA RAID controller to
ATA mode.
•
ahci — sets ATA RAID controller to
ahci mode.
•
raid — sets SATA RAID controller
to RAID mode.
•
qdma — sets the SATA RAID
controller to support ATAPI devices
at transfer rates much higher than
PIO. A device driver must be
installed on your system to use the
QDMA mode.
Example:
A:>syscfg --embsataraid=
off
embsataraid=off
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--embscsi1 on, off Turns the first embedded SCSI
controller. This option is only valid
for supported systems that have an
embedded SCSI controller. This
option can be replicated.
Example:
A:>syscfg --embscsi1=on
embscsi1=on
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems