Quick Reference Guide

42 SYSCFG
--embnic4 on, off,
onnopxe,
onwithiscsi
Turns the fourth embedded NIC on
with PXE enabled, off, or on without
PXE enabled. This option is only
valid for supported systems that have
four embedded NICs. If the fourth
NIC is enabled without PXE, it is not
found in the boot order. If the fourth
NIC is turned on with PXE, it is
placed at the end of the boot order.
The onnopxe argument is not
supported on all systems. This option
can be replicated.
The onwithiscsi argument enables
the embedded NIC to boot from the
iSCSI server. The embnic4 option
can be replicated.
Example:
A:>syscfg --embnic4=
onnopxe
embnic4=onnopxe
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--emb
nic1nic2
enable, disable Enables or disables the operating
system interface of the first and
second embedded NIC controllers.
Example:
A:>syscfg --embnic1nic2=
enable
--embnic1nic2=enable
PowerEdge
1855,
PowerEdge
6850, and
PowerEdge
yx1x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems