Quick Reference Guide

38 SYSCFG
numerical list,
separated by
commas
or
list of device
names,
separated by
commas
Example 1:
A:>syscfg --devseq
The following devices are
set in the disk device
sequence:
Device 1:* hdd.emb.0 -
System BIOS boot devices
Device 2:* scsiraid.slot.3
- PERC 4/SC Adapter(bus 02
dev 02)
Device 3:* usbkey.slot.0 -
Hard-disk-emulated USB
flash drive
Example 2:
A:>syscfg --devseq=
hdd.emb.1,scsiraid.emb.1
The following devices are
set in the disk device
sequence:Device 1:*
hdd.emb.0 - System BIOS
boot devices
Device 2:* scsiraid.emb.1
- AIC-7899, A:00 Seagate
NOTE: The asterisk indicates that the
device is enabled in the BIOS.
--emb
hypervisor
off, on Turns on or off the embedded
hypervisor port.
Example:
A:>syscfg --embhypervisor=
on
embhypervisor=on
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems