Quick Reference Guide

342 Summary of SYSCFG and RAIDCFG Options
-si
or
silent
NA Does not display any information on
the terminal console.
Optional.
See
Table 4-15
for specific
usage
information.
-sz
or
size
<number> Sets the maximum size on the virtual
disk in MB or GB if the size is not
provided.
The default size is in MB. If GB
follows the number, the size is
expressed in GB.
Optional.
See
Table 4-4 for
specific
usage
information.
-sp
or
spanlength
<number> The span size of RAID 5, which is a
mandatory parameter for RAID 50.
NOTE: Spanlength is applicable only
for RAID 50. The minimum permissible
spanlength value is 3. The number of
array disks for creating virtual disks
should not be a prime number and
should be divisible by the specified
spanlength.
Mandatory.
See
Table 4-4 for
specific
usage
information.
-ssz
or
stripesize
<number> Sets the stripe size on the virtual disk
in KB.
NOTE: When creating virtual disks, do
not specify the units for chunk (stripe)
size. The units are always listed in KB.
Optional.
See
Table 4-4 for
specific
usage
information.
-vd
or
vdisk
NA Displays the virtual disks under all of
the controllers along with the physical
array disks that make up the virtual
disks.
See
Table 4-6 for
specific
usage
information.
Table D-3. RAIDCFG Short and Long Format Options
(continued)
Option Valid Arguments Short Description Mandatory
or Optional