Quick Reference Guide

SYSCFG 33
--cmos
defaults
enable, disable Requests a default CMOS value
during the next reboot.
A:>syscfg --cmosdefaults=
enable
cmosdefaults=enable
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--conboot enable, disable Configures or reports if console
redirection occurs after boot. This
option is available on all supported
systems that support console
redirection. This option can be
replicated.
Example:
A:>syscfg --conboot=enable
conboot=enable
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
--conred serial1, serial2,
off, bmcsol,
mmb
Configures or reports the
communication port for console
redirection. If this option is set to a
serial port, then the serial port option
is not available. If only one serial port
is present on a system, the serial2
argument is not available. This option
can be replicated.
Example:
A:>syscfg --conred=serial1
conred=serial1
All
PowerEdge
systems
prior to
PowerEdge
x9xx
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems