Quick Reference Guide

32 SYSCFG
Device 6:* virtual.slot.2
- VIRTUALFLOPPY DRIVE
Device 4:* nic.emb.1 - IBA
GE Slot 0638 v1226
Example 2:
#syscfg --bootseq=
nic.emb.1,virtual.slot.1
The following devices are
set in the boot sequence:
Device 4:* nic.emb.1 - IBA
GE Slot 0638 v
Device 5:* virtual.slot.1
- VIRTUALCDROM DRIVE
Device 2: cdrom.emb.0 -
IDE CD-ROM device
Device 3: hdd.emb.0 - Hard
drive C:
Device 1: floppy.emb.0 -
Diskette drive A:
NOTE: The asterisk indicates that the
device is enabled in the BIOS.
--bootseq
retry
enable, disable Enables or disables the boot sequence
retry feature. When set to enable, the
system re-attempts to set the boot
order after a 30-second time-out if
the last boot attempt has failed.
This option can be replicated.
A:>syscfg --bootseqretry=
enable
bootseqretry=enable
All
PowerEdge
systems
prior to
PowerEdge
yx2x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems