Quick Reference Guide

Summary of SYSCFG and RAIDCFG Options 315
--HddSeq numerical list,
separated by
commas or list of
device names,
separated by
commas
Specifies the order in which
hard-disk drives are
configured in the system.
The first hard drive in the
system will be the bootable
C: drive in DOS/DOS-like
operating systems. This
option is applicable when
bootmode is set to Bios
and has no effect when
bootmode is set to Uefi.
Boot Settings --BootMode Bios, Uefi Determines the boot mode
of the system.
--BootSeqRetry Enabled,
Disabled
Enables or disables the
Boot Sequence Retry
feature. When set to
Enabled, the system
attempts the boot sequence
after a 30-second timeout if
the last boot attempt has
failed.
Embedded
Server
Management
--FrontLcd None, UserDefined,
ModelNum,
Advanced
Allows you to set the model
number or a user-defined
string on the front-panel
LCD display.
--UserLcdStr <string> Allows you to set the
default string (model name
and number for PowerEdge
systems earlier than Dell
PowerEdge yx1x, and
service tag for PowerEdge
systems yx1x and later) or a
user-defined string on the
front-panel LCD. The
maximum length of the
string is 62 characters.
Table D-2. SYSCFG Options on PowerEdge
yx2x Systems (continued)
Group Option Valid Arguments Description