Quick Reference Guide

Summary of SYSCFG and RAIDCFG Options 303
--tpm
activation
enabled,
disabled,
nochange
Enables or disables the
TPM activation
feature.
Yes
--tpmclear NA Clears the contents of
the TPM chip without
erasing the
tpmsecurity and
tpmactivation settings.
No
--undo
tpmclear
NA Undoes the result of
the tpmclear setting. If
you specify this setting
before specifying the
tpmclear setting, the
There is
currently no
pending TPM
Clear request
message is displayed.
No
--valsetup
pwd
<string> Validates the setup
password for TPM
authentication. If you
try to change DTK
settings, you are
prompted to enter this
password to access the
settings.
No
--setuppwd
override
NA On systems that do not
have a setup password
configured, if you set
this option, you are not
prompted for a
password to access
DTK settings.
No
--turbomode NA enable, disable Enables or disables
core-based turbo
mode.
Yes
Table D-1. SYSCFG Options on Systems Prior to PowerEdge
yx2x systems
Options Sub-options Valid Arguments Description Replicated