Quick Reference Guide

SYSCFG 25
SYSCFG for BIOS Configuration
SYSCFG uses BIOS interfaces to manipulate boot order and BIOS settings.
It configures all options available on the BIOS setup screen, including boot
order, embedded device configuration, and asset tag management.
SYSCFG Options Supported on PowerEdge Systems Prior to PowerEdge
yx2x Systems
Table 3-2 documents valid options and arguments supported on PowerEdge
systems earlier than PowerEdge yx2x systems. Options and arguments are
case-sensitive. All options and pre-defined arguments are lowercase unless
stated otherwise. Running SYSCFG without arguments only displays the
valid options. The system must be rebooted for BIOS options to take effect.
Some of the following options or arguments may not be available on all
systems due to the BIOS version or hardware feature set.