Quick Reference Guide

226 Messages and Codes
48 Command response could not be provided. SDR
Repository in update mode.
49 Cannot execute command, SEL erase in progress.
50 Attempt to set the 'set in progress' value when
not in the 'set in complete' state.
51 The SOL character ’accumulate interval’ is
invalid.
52 The SOL character ’send threshold’ is invalid.
53 The SOL ’retry interval’ is invalid.
54 Command completed successfully.
55 Time-out while processing command. Response
unavailable.
56 Unspecified error.
57 The password may only contain printable ASCII
characters.
58 Username cannot exceed 16 characters.
59 Invalid VLANID value. Enter in ’dddd’ format.
60 Attempt to write read-only parameter ’%s’.
61 BMC is busy.
62 Response data did not return successfully.
63 BMC time out error.
64 Option '%s' requires an argument.
65 The asset tag for this system is not available.
66 The asset tag cannot be more than 10 characters
long.
67 The required BIOS interfaces cannot be found on
this system.
68 The BIOS version information is not available.
Table A-1. SYSCFG Error Codes and Messages
(continued)
Error
Code
Message