Quick Reference Guide

Messages and Codes 225
30 Invalid VLANID value.
31 Invalid Command. Used to indicate an unrecognized
or unsupported command.
32 Command invalid for given LUN.
33 Load defaults cannot be accompanied with any other
option.
34 There was an error loading the defaults.
35 Node Busy. Command could not be processed because
command processing resources are temporarily
unavailable.
36 Out of space. Command could not be completed
because of a lack of storage space required to
execute the given command operation.
37 This parameter is not supported.
38 Parameter out of range. One or more parameters in
the data field of the Request are out of range.
39 The password may only contain printable ASCII
characters.
40 Password test failed.
41 Requested data length invalid.
42 Requested data field length limit exceeded.
43 Requested Sensor, data, or record not present.
44 Request data truncated.
45 Command response could not be provided.
46 Command response could not be provided. BMC
initialization or initialization agent in
progress.
47 Command response could not be provided. Device in
firmware update mode.
Table A-1. SYSCFG Error Codes and Messages
(continued)
Error
Code
Message