Quick Reference Guide

RAIDCFG 199
Importing and Clearing Foreign Configurations
Table 4-8 lists the RAIDCFG options, parameters, and pre-defined arguments
for foreign configurations.
Table 4-7. Initializing Virtual Disks
Mandatory
Options and
Arguments
Optional
Parameters
Valid
Parameter
Arguments
Description
-vd -c=id -
vd=id -ac=fi
or
vdisk
controllerid=
id vdisk=id
action=
fastinit
NA <valid virtual
disk ID
number>
Initializes the selected virtual disk in the
selected controller with the fastinit command.
This feature is supported on PERC 5 and later
controllers and is not supported on SAS
controllers.
Using the fastinit command on
unsupported controllers returns an error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -ac=
fi
-vd -c=id -
vd=id -ac=
sli
or
vdisk
controllerid=
id vdisk=id
action=
slowinit
NA <valid virtual
disk ID
number>
Initializes the selected virtual disk in the
selected controller with the slowinit
command. This feature is supported on PERC
5 and later controllers and is not supported on
SAS controllers. Using the slowinit command
on unsupported controllers returns an error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -ac=
sli
-vd -c=id -
vd=id -ac=
sli
or
vdisk
controllerid=
id vdisk=id
action=
cancelinit
NA <valid virtual
disk ID
number>
Cancels the initialization of the virtual disk
with the cancelinit command. This feature is
supported on PERC 5 and later controllers
and is not supported on SAS controllers.
Using the cancelinit command on
unsupported controllers returns an error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -ac=
ci