Quick Reference Guide

190 RAIDCFG
Enumerating Array Disks
Table 4-5 lists the RAIDCFG options, parameters, and pre-defined arguments
for enumerating array disks (hard drives).
• nwc — No-Write-Caching specifies
that the controller does not send a
write-request completion signal
after the data is written to the disk.
NOTE: The wc and nwc options are
supported on the CERC SATA 1.5/CH
controller only.
The -wp option is optional and can be
added to the command line in any
order after the mandatory option
combination.
For SCSI controllers, the value of
LUN should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you must specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks
(continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description