Quick Reference Guide

186 RAIDCFG
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:targ
, ...
[or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target:
lun,
channel:target:
lun,...
[or
channel:target:
enclosure,...]
-str
or
strict
<number> Strict (-str parameter) is the
percentage of expected array disk
utilization.
Example:
A:> raidcfg -ctrl -ac=
cvd -c=0 -ad=0:0,0:1 -
r=1 -str=20
If the unused portion of an array disk
is greater than the above percent,
raidcfg aborts.
For SCSI controllers, the value of
LUN should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you must specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks
(continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description