Quick Reference Guide

RAIDCFG 185
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:targ,
...
[or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target:
lun,
channel:target:
lun,...
[or
channel:target:
enclosure,...]
-ssz
or
stripesize
<number> Sets the stripe size for the virtual disk.
The stripe size is the amount of array
disk space used on each array disk
included in the stripe. A valid
argument is a number that is less than
the size of the virtual disk. The -ssz
option is optional and can be added
to the command line in any order
after the mandatory option
combination. However, do not specify
a unit for stripe size when creating
virtual disks. The unit is always
displayed in KB.
For SCSI controllers, the value of
LUN should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you must specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks
(continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description