Quick Reference Guide

184 RAIDCFG
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:targ,
...
[or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target:
lun,...
channel:target:
lun,...
[or
channel:target:
enclosure,...]
-sp
or
spanlength
<number> Creates a virtual disk comprised of
the properties supplied. The -sp
option is optional and can be the
added to the command line in any
order after the mandatory option
combination.
NOTE: Spanlength is applicable only
for RAID 50 and RAID 60. The minimum
permissible spanlength value for RAID
50 is 3 and for RAID 60 is 4. The number
of array disks for creating a virtual disk
should not be a prime number and
should be divisible by the specified
spanlength.
For SCSI controllers, the value of
LUN should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you must specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks
(continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description