Quick Reference Guide

RAIDCFG 169
-envn
or
envname
<string> Sets the environment
variable (<string>) that
equates to the value
returned from a function
call.
See Table 4-12 for
specific usage
information.
-fd
or
failoverdrive
ch:targ, ch:targ, ...
or ch:targ:lun,...
or ch:targ:enc
channel:target, or
channel:target:lun
, or
channel:target:en
closure
Specifies the location of the
failover drive in an array.
For SCSI controllers, the
value of LUN should
always be 0.
For SAS controllers, the
value of enclosure can be
non-zero, in which case you
must specify values for
channel, target, and
enclosure.
NOTE: From DTK 2.4
onwards, the -fd option
creates dedicated hot spares
instead of global hot spares.
To set global hot spares, see
Table 4-10.
Optional.
See Table 4-4 for
specific usage
information.
-i <filename> Reads the RAID
configuration information
from the given .ini filename
and creates the RAID
configurations on the
specified controllers.
Mandatory.
See Table 4-14 for
specific usage
information.
-l
or
logfile
<filename> Logs command line output
to a file.
Optional.
See Table 4-15 for
specific usage
information.
Table 4-1. RAIDCFG Short and Long Format Options
(continued)
Option Valid Arguments Short Description Mandatory or
Optional