Quick Reference Guide

SYSCFG 133
--alertpol
status
enable, disable Enables or disables
the alert policy
specified using the
alertpolnum sub-
option. This sub-
option can be
replicated. This sub-
option is dependent
on the alertpolnum
sub-option.
Example (to set the
PEF configuration
parameters):
Example 1 (To
configure the PEF so
that the system is
powered down in
response to a fan
failure event):
A:>syscfg
pefcfgparams
--filter=
fanfail
--filteraction=
powerdown
pefcfgparams
filter=fanfail
filteraction=
powerdown
Table 3-7. BMC and RAC Options
(continued)
Option Sub-option Valid
Arguments
Description Applicable
Systems