Quick Reference Guide

SYSCFG 121
--nicselection
failover
none, lom1,
lom2, lom3,
lom4, all
Sets the operating
mode of the NIC
selection failover to
none, lom1, lom2,
lom3, lom4,or all.
Some of these options
are not applicable on
certain systems. due
to underlying
hardware.
NOTE: This
option is
applicable
on
PowerEdge
yx2x
systems.
--fullduplex enable, disable Enables or disables
full duplex on the
RAC network
interface.
--autoneg enable, disable Enables or disables
autonegotiation.
--speed 10,100 Sets the network
interface speed to 10
or 100 Mbps.
--dnsdhcp enable, disable Enables or disables
obtaining the DNS
server IP address
through DHCP.
--dnsserver1 <ipaddress> Sets the IP address of
the primary DNS
server for domain
name resolution.
--dnsserver2 <ipaddress> Sets the IP address of
the secondary DNS
server for domain
name resolution.
--dns
registerrac
enable, disable Enables or disables
binding of the RAC
name to the IP
address.
Table 3-7. BMC and RAC Options
(continued)
Option Sub-option Valid
Arguments
Description Applicable
Systems