Quick Reference Guide

SYSCFG 107
--MemVolt AutoVolt, Volt15V,
Volt135V
NOTE: Volt15V
represents 1.5 Volt
and Volt135V
represets 1.35 Volt.
Sets the DIMM voltage
selection.
--ProcC1E Enabled, Disabled When set to Enabled, the
processor is allowed to
switch to minimum
performance state when
idle.
--ProcCStates Enabled, Disabled When set to Enabled, the
processor can operate in all
available power states.
--ProcPwrPerf MaxPerf, MinPwr,
SysDbpm,
OsDbpm,
Sets CPU Power
Management to maximum
performance, operating
system DBPM, or System
DBPM (DAPC).
--ProcTurboMode Enabled, Disabled When set to Enabled, the
processor can operate in
Turbo Boost Mode.
--SysProfile PerfPerWatt
OptimizedOs,
PerfPerWatt
OptimizedDapc,
PerfOptimized,
Custom, DenseCfg
Optimized
Sets the System Profile to
Performance Optimized,
Power Optimized (DAPC),
Power Optimized (OS),
Dense Configuration
Optimized, or Custom
mode. When set to a mode
other than Custom, BIOS
will set each option
accordingly. When set to
Custom, you can change
setting of each option.
Table 3-6. SYSCFG Options and Arguments for BIOS Configuration on PowerEdge
yx2x
Systems
(continued)
Group Option Valid Arguments Description