Quick Reference Guide

Introduction 7
1
Introduction
Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities,
sample scripts, and sample configuration files to deploy and configure your
Dell system. You can use DTK to build script-based and RPM-based
installation for deploying a large number of systems reliably, without changing
their current deployment processes. You can use DTK in a Microsoft
Windows Preinstallation Environment (Windows PE) or a Linux
environment.
What’s New in This Release
• Added support for SUSE Enterprise Linux 11 SP2 (64-bit).
• Deprecated the following operating systems:
– Red Hat Enterprise Linux 6.0 (64-bit)
– Red Hat Enterprise Linux 5.5 (32-bit and 64-bit)
– SUSE Enterprise Linux 11 SP1 (64-bit)
– Microsoft Windows Server 2003 R2 (32-bit and 64-bit)
– Microsoft Windows Server 2003 (32-bit and 64-bit)
• Support for Dell PowerEdge
yx2x systems.
•On PowerEdge
yx2x systems, all the SYSCFG options are grouped as per
the BIOS. SYSCFG configures and reports the current and pending BIOS
attributes.
• If the system has setup password, BIOS configuration using SYSCFG
requires the setup password.
• Attributes such as ipv6, power budget, dynamic DNS, and dedicated NIC
configurations are available only with the appropriate installed license.
• RAIDCFG extends support to Dell PERC 8 controllers (H310, H710,
H710P, and H810) and software RAID S110 controller.
• Support for configuring iDRAC7 through RACADM.
NOTE: For more information on new SYSCFG features, see "SYSCFG Options
Supported on PowerEdge yx2x Systems" on page 86.