Quick Reference Guide

48 SYSCFG
--embscsi2 on, off Turns the second embedded SCSI
controller. This option is only valid for
supported systems that have an
embedded SCSI controller. This
option can be replicated.
Example:
A:>syscfg --embscsi2=on
embscsi2=on
PowerEdge
x9xx and
later
systems
running on
Intel
processors
--emb
scsiraid
raid, off, scsi Sets the specified value for the SCSI
RAID controller. This option is only
valid for supported systems that have
SCSI ROMB. Some systems do not
support the scsi argument. This option
can be replicated.
CAUTION: If you change the
controller from SCSI to RAID mode,
data loss may occur. Backup any data
you must save before changing modes.
Example:
A:>syscfg --embscsiraid=
raid
embscsiraid=raid
PowerEdge
yx1x
systems
--emb
scsiraidchb
raid, scsi Sets the second channel on an
embedded RAID controller to SCSI
or RAID. This option is only valid for
systems that support RAID/RAID and
RAID/SCSI settings for channels A
and B. This option can be replicated.
Example:
A:>syscfg --
embscsiraidchb=raid
embscsiraidchb=raid
PowerEdge
yx1x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems