Quick Reference Guide

46 SYSCFG
--emb
nic1pxe
enable, disable Enables or disables Preboot
Execution Environment (PXE) on
the first embedded NIC. If PXE is
disabled, the first NIC is not found in
the boot order. If PXE is enabled, the
first NIC is placed at the end of the
boot order. This option is only present
on systems that do not support the
embnic1 option. This option can be
replicated.
Example:
A:>syscfg --embnic1pxe=
enable
embnic1pxe=enable
PowerEdge
R715,
R815,
R515,
R415, and
M915
systems
with AMD
Opteron
6000 series
processor
--emb
nic2pxe
enable, disable Enables or disables PXE on the
second embedded NIC. If PXE is
disabled, the second NIC is not found
in the boot order. If PXE is enabled,
the second NIC is placed at the end
of the boot order. This option is only
present on systems that do not
support the embnic2 option. This
option can be replicated.
Example:
A:>syscfg --embnic2pxe=
disable
embnic2pxe=disable
PowerEdge
yx1x
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration Prior to PowerEdge
yx2x Systems (continued)
Option Valid Arguments Description Applicable
Systems