Owner's Manual

Preparing the Script Files 63
raidcfg.sh Configures the selected
RAID controller
detected in the system.
• tkenvset.sh — Used by
raidcfg.sh to inform the task
scripts where to find the DTK
utilities, scripts, and
configuration files.
•
raidcfg — Used by raidcfg.sh
to retrieve RAID information
and to configure settings.
partcfg.sh Creates and populates
the Dell utility parti-
tion and the deploy-
ment partition on a
specified disk. The
partcfg.sh script uses a
/tmp folder to store a
few temporary files criti-
cal to its execution.
•
tkenvset.sh — Used by
partcfg.sh to inform the task
scripts where to find the DTK
utilities, scripts, and
configuration files.
•
fdisk — Used to create
partitions on your disk. When
creating an embedded Linux
ISO image, make sure that
fdisk is present in the
embedded Linux you created.
This script uses the following
file for noninteractive
(unattended) operations:
–
upinit.sh — Used by
partcfg.sh to create and
populate the Dell utility
partition.
NOTE: Do not make any
modifications to the upinit.sh
script.
Table 5-8. Other Scripts for Linux
(continued)
Script Name Description Associated Files