Owner's Manual

62 Preparing the Script Files
PARTCFG.BAT Creates and populates
the Dell utility
partition (UP) and the
operating system
partition on a specified
disk.
• TKENVSET.BAT — Used by
PARTCFG.BAT to inform the
task scripts where to find the
DTK utilities, scripts, and
configuration files.
•
DISKPART.EXE — Provided
by Windows; this script is used
to create partitions on your
disk. When creating a
Windows PE image, make sure
that
DISKPART.EXE tool is
present in the Windows PE
image you created. This script
uses the following files for
noninteractive (unattended)
operations:
–
UPINIT.BAT — Used by
PARTCFG.BAT to create
and populate the Dell utility
partition.
–
FORMAT.EXE — Provided
by Windows to format the
partition.
Table 5-8. Other Scripts for Linux
Script Name Description Associated Files
tkenvset.sh Sets the path of DTK
installation and vari-
ables for the system to
be deployed and con-
figured. The variables
and paths in this file
must be specified
before any of the other
supporting scripts can
be used.
• syscfg — Used by tkenvset.sh
to discover the system type.
Table 5-7. Other Scripts for Windows (continued)
Script Name Description Associated Files