Owner's Manual

44 Setting Up a Directory Structure for Deployment
DTK Utilities and Files
All necessary DTK files are provided as part of the initial installation. It is
strongly suggested that you use the default directory structure created in the
initial installation of DTK components. The sample scripts provided with
DTK are set up to use these default paths. See Figure 4-1 for Windows
operating system.
NOTE: If you choose to create a directory structure for DTK components that is
different from the one provided in the initial installation, carefully review and edit
each sample script (wherever necessary) to reflect the different directory
structure.
A 32-bit unzip utility is required to create the Dell utility partition. Make sure
that you copy this utility to one of the directories of your Windows PE image,
preferably \windows\system32 folder for Windows or /systems folder for
Linux.
System-Specific Files
The directory Toolkit\Systems in Windows and
/opt/dell/toolkit/systems/system name acts as a central repository for all the
system-specific deployment information. For Linux, the /systems folder
acts as a repository for the common files required for the systems. For
windows, you can store all profile configuration files for an optimally
configured PowerEdge R720 in the directory Toolkit\Systems\peR720 as
shown in Figure 4-1. You can access these files from the directory when
deploying multiple PowerEdge R720 systems.
NOTE: If you choose to create a directory structure for the system-specific files that
is different from the one suggested in this guide, be sure to carefully review and edit
each sample script (wherever necessary) to reflect the different directory structure.