Owner's Manual

36 Downloading DTK
Sample Configuration Files
Table 3-5 and Table 3-6 describes examples of Windows and Linux
configuration files used to perform a scripted deployment. The Windows files
for 32-bit and 64-bit supported systems are located in the following
directories:
• \Dell\x32\Toolkit\Template\Configs
• \Dell\x64\Toolkit\Template\Configs
The Linux files are located at opt/dell/toolkit/template/configs.
NOTE: All configuration files are provided as examples only. These sample
configuration files must be edited before they can be used in any deployment tasks.
raidcfg Creates and reports RAID information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.
stsvc.ini Configuration file used by raidcfg.
syscfg
•Reports and configures:
– Basic Input/Output System (BIOS) settings and options
– Baseboard Management Controller (BMC) settings and
options
–DRAC
• Maintains system state between reboots.
• Reports hardware devices and other system-related
information.
SyscfgErrorCodes.txt Lists the error codes and messages for the syscfg tool.
sys.ini A .ini file used with syscfg.
UpinitErrorCodes.txt Lists the error codes and messages for upinit.sh.
Table 3-4. System Utilities and Supporting Files for Linux
(continued)
Toolkit Components Purpose