Owner's Manual

30 Downloading DTK
DTK utilities for 32-bit systems are located in the following directories:
• Utilities: \Dell\x32\Toolkit\Tools
•Sample scripts: \Dell\x32\Toolkit\Template\Scripts
• Sample configuration files: \Dell\x32\Toolkit\Template\Configs
DTK utilities for 64-bit systems are located in the following directories:
• Utilities: \Dell\x64\Toolkit\Tools
•Sample scripts: \Dell\x64\Toolkit\Template\Scripts
• Sample configuration files: \Dell\x64\Toolkit\Template\Configs
The directory \Dell\x32\Toolkit\Systems or \Dell\x64\Toolkit\Systems is a
placeholder that can be used for all system information that is captured using
sample scripts and tools (for example, the system specific Basic Input/Output
System (BIOS) and Baseboard Management Controller (BMC) configuration
files used by the DTK utilities for configuring a system). See "Setting Up a
Directory Structure for Deployment" on page 43 for further discussion of the
deployment directory structure.
For Embedded Linux
DTK components are provided as an ISO image at support.dell.com. You can
use a CD/DVD burning software to burn the ISO image on a bootable
CD/DVD or loop mount the ISO image to access the image contents.
Perform the following steps to extract DTK components to a workstation
running a Linux operating system:
1
Download the ISO image dtk_X.X_XXX_Linux.iso from
support.dell.com and save it on your system (where X is the latest version
of DTK and
XXX is the latest build for DTK release).
2 After the image downloads, burn it on a CD/DVD.
The directory structure on the CD/DVD (after it is mounted) is shown in
Figure 3-2.