User's Manual

94 Preparing the Directory Structure for Deployment in Embedded Linux
System Utilities and Supporting Files
Table 7-3 describes the files, located at /opt/dell/toolkit/bin and the
supporting libraries located in /opt/dell/toolkit/lib. For complete information
about the capabilities of each DTK utility, see the Command Line Interface
Reference Guide.
Table 7-3. System Utilities and Supporting Files
Toolkit Components Purpose
config.ini Configuration file used by raidcfg.
pci.ids Used with syscfg to report PCI devices.
racadm Wrapper script which invokes racadm4, racadm5, or
racadm6 depending on the Remote Access Controller
(RAC) on your system.
racadm4 Configures DRAC 4/P and DRAC 4/I RACs.
racadm5 Configures DRAC 5 RACs.
racadm6 Configures iDRAC6.
NOTE: This feature may not be supported on all systems.
racadmErrorCodes.txt Lists the error codes and messages for the racadm tool.
racser Chat script to bring up a Point-to-Point Protocol (PPP)
connection required to transport racadm3.
racsvc4.sh Start-up script for DRAC 4/P and DRAC 4/I RACs.
raidcfg Creates and reports RAID information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.
stsvc.ini Configuration file used by raidcfg.
syscfg
•Reports and configures:
– Basic Input/Output System (BIOS) settings and options
– Baseboard Management Controller (BMC) settings and
options
–DRAC
• Maintains system state between reboots.
• Reports hardware devices and other system-related
information.