User's Manual

82 Choosing an Embedded Linux-Based Deployment Method
Network-Based Deployment
NOTE: DTK network-based deployment is not supported from mapped
Novell NetWare systems.
The general network-based deployment process includes the following steps:
1
Modify the appropriate section in pxe config file.
2 Boot the target server from PXE.
DTK start-up phase mounts the network share specified in the
pxe config
file.
DTK start-up phase runs the script (name specified in the
pxe config file)
from the network.
Alternatively, to integrate DTK components into an existing third-party
deployment solution framework, see "Using a Third-Party Deployment
Solution Framework" on page 83.
Media-Based Deployment With Network Access
The general steps include:
1
Copy the DTK ISO image into a share.
2 Modify the appropriate section in the isolinux / isolinux.cfg file.
3 Reburn the contents into a CD/DVD (master CD/DVD).
4 Boot the target server from the master CD/DVD.
DTK start-up phase mounts the network share specified in the
isolinux.cfg
file.
DTK start-up phase runs the script (name specified in the
isolinux.cfg
file) from the network.