User's Manual

Preparing the Directory Structure for Deployment in Microsoft Windows PE 47
13 On the target system, set the following environment variables:
DT_OSSRC=z:\W2K3SRC\I386
DT_UNATTEND=z:\dell\x32\toolkit\systems\PER515
\unattend.txt
DT_OEM=
z:\dell\x32\toolkit\systems\PER515\$OEM$.NET
14
Navigate to the mount point z:\dell\x32\toolkit\template\scripts.
15 Run the partcfg.bat script to create the partition.
16 Run wininst.bat to install the operating system.
17 Reboot the target system once you are at the command prompt and the
system starts booting to the hard drive for operating system installation.
Creating Operating System Installation Directories for Windows Server 2008
Operating Systems
NOTE: The following procedures are provided as best practice guidelines for
creating operating system distribution folders compatible with DTK sample scripts.
For complete instructions on setting up an installation directory structure for an
unattended installation, see your operating system documentation.
To deploy Windows Server 2008 operating systems:
1
Create an operating system-specific directory in the root directory of the
network share. For example,
W2K8_deploy.
2 Create two directories under the W2K8_deploy directory: sources and
< platform name > , for example, PE2950 . Copy the contents of the
operating system media to
sources .
NOTE: The platform name should be a DTK standard name. To know
the platform name, run
TKENVSET.BAT located in the
x:\Dell\32\Toolkit\template\scripts directory, and then run the SET
command. In the Details section, see the DT_PLATFORM name.
3 Under PE2950 , create two directories: $OEM$ and Out-of-Box Drivers .
4 Copy all the drivers to W2K8_deploy\PE2950\ Out-of-Box Drivers . You
can copy each driver to a different sub-folder.
5 Copy unattend.xml from \Toolkit\template\Configs to
W2K8_deploy\PE2950 .