User's Manual

Preparing the Directory Structure for Deployment in Microsoft Windows PE 35
System Utilities and Supporting Files
Table 3-1 describes the files located in Toolkit\Tools. These are the core tools
(utilities) that perform pre-operating system configuration and deployment
tasks. See the Dell OpenManage Deployment Toolkit Command Line Interface
Reference Guide for complete information about the capabilities of each DTK
utility.
Table 3-1. System Utilities and Supporting Files
Toolkit Components Purpose
config.ini Configuration file used by RAIDCFG.EXE.
NOTE: Do not edit this file. Incorrect edits might cause
RAIDCFG.EXE to fail.
mr2kserv.exe Service that needs to be running for RAIDCFG.EXE to
function.
IDRAC Configures iDRAC6.
NOTE: This feature may not be supported on all systems.
pci.ids Reports PCI devices when used with SYSCFG.EXE.
RAC 4 Configures Dell Remote Access Controller (DRAC) 4/P
and DRAC 4/I.
RAC 5 Configures DRAC 5/iDRAC.
racadmErrorCodes.txt Lists the error codes and messages for the RACADM.EXE
tool.
RAIDCFG.EXE Creates and reports Redundant Array of Independent Disks
(RAID) information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the RAIDCFG.EXE
tool.
stsvc.ini Configuration file used by RAIDCFG.EXE.
NOTE: Do not edit this file. Incorrect edits might cause
RAIDCFG.EXE to fail.
sys.ini A .ini file used with syscfg.