User's Manual

Running Deployment Scripts and RPMs Using DTK and Embedded Linux 133
For RPM-based deployment:
1
Mount the media and navigate to / mnt/cdrom/RPMs directory.
NOTE: The /mnt/cdrom/RPMs directory contains all DTK RPMs and the
dependency RPMs.
2 Install the required DTK RPMs. For more information about DTK RPMs,
see Table 7-6.
NOTE: To resolve the RPM dependency related issues, install the missing
RPMs from /mnt/cdrom/RPMs directory. If the RPMs are not available in this
directory, install these RPMs from the operating system media.
NOTE: The raidcfg and syscfg binary files are installed at /opt/dell/toolkit/bin.
The supporting libraries for raidcfg are installed at /opt/dell/toolkit/lib. The
racadm binary files are installed at /opt/dell/srvadmin/bin and
/opt/dell/srvadmin/sbin.
3 Export the PATH and LD_LIBRARY_PATH environment variables of
the binary files and supporting libraries for the installed RPMs.
4 To start the services, navigate to /opt/dell/srvadmin/sbin , and then type:
srvadmin-services.sh start
5
Execute the commands to configure as per the requirements. See the Dell
OpenManage Deployment Toolkit
Command Line Interface Reference
Guide
for a complete description of the commands.
Deployment Using Customized Embedded Linux
Ensure that you have the following basic libraries, Dell toolkit libraries, tools,
and utilities required for DTK to work in your customized Linux deployment
environment (For details on files and RPMs to customize your embedded
Linux, see Table 7-1):
• Drivers for all your hardware installed in your embedded Linux at
support.dell.com
• Serial port configuration utilities ( setserial and stty ) for racadm
• Installed and working instrumentation drivers from /mnt/cdrom/tools
• Point-to-Point Protocol (PPP) tools