Quick Reference Guide

SYSCFG 85
Table 3-3 lists the sub-options and arguments for the tpm option.
Table 3-3. Sub-options and Arguments for the tpm Option
Option Sub-option Arguments Description
tpm --tpmsecurity off Does not report the presence of TPM to
the operating system.
onwithpbm Directs the BIOS to store the TCG
compliant measurements to the TPM
during a POST operation.
onwithoutp
bm
Directs the BIOS to bypass the pre-boot
measurements.
Example:
A:>syscfg tpm --tpmsecurity =
onwithoutpbm --
setuppwdoverride
--tpmactivation enabled Enables and activates the TPM feature.
disabled Disables and deactivates the TPM feature.
nochange Does not alter the operational state of the
TPM feature.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
setuppwdoverride
NOTE: You cannot set tpmactivation when
tpmsecurity is set to off.
NOTE: After setting tpmactivation to
enabled or disabled, if you reboot your
system, DTK displays the TPM
Configuration Honoured system
will reset and the system
reboots again message and reboots.
NOTE: When you set tpmactivation to
enabled or disabled, DTK displays the value
of tpmactivation as nochange. However, the
TPM feature is activated/deactivated when
you reboot the system.